10.11.2010

Elegant Janesko


This tutorial is for those that have a working knowledge of PSP. This tutorial was written by me on the 7th day of September 2010 and any resemblance is purely coincidental. I used PSP 9, but any version should work. I do not allow my tutorials to be translated and please do not claim them as your own. If you would like to share the tutorial please send a link to my blog.

The materials you will need:

Scrap kit: I used A Taggers Scrap Elegant Formal Taggers Kit which you can find at Sophisti-scraps

Tube of Choice: I am using the work of the talented: Jennifer Janesko You cannot use her work without a license but you can purchase a license from CILM

Plugin: Jeux de lignes –Enterlacement

Mask of Choice

Shall we Begin?
1. Open a new image 600x600; transparent
2. Open frame2.png and resize by 50%
3. Paste as a new layer on our working image
4. Rotate to the left 90 degrees
5. Click inside the frame with your magic ward
6. Selections- Modify- Expand by 3
7. Open paper 16.jpg and resize by 60%
8. Paste as a new layer and move to fit the frame
9. Selections- Invert – hit delete on your keyboard
10. Move this layer below our frame layer
11. Selections—Select none
12. Place your tube at this time to your liking
13. Open Lace4.png and resize by 50%
14. Paste as a new layer and using your point to point tool select the excess and hit delete on your keyboard
15. Select None
16. Repeat steps 13-15 with heart wrap of your choice
17. Choose 2 hearts of your liking and resize both by 50% twice
18. Paste each as a new layer on the bottom right of our frame
19. Open red circle frame
20. Resize by 50%
21. Paste as a new layer to the right of our frame
22. Send layer to the bottom
23. Duplicate –Image mirror (make sure both frames are to your liking and merge these two layers visible
24. Duplicate and move to the middle
25. Duplicate again and move to the top ( look at my tag for placement)
26. Merge the 3 red frame layers together
27. Duplicate and on the copy blur this layer
28. Adjust—blur—Gaussian blur 5
29. Apply the plugin Jeux de lignes –Enterlacement with the default settings
30. Now apply any extra elements of your choosing
31. Merge all layers visible
32. Duplicate
33. Resize the top layer by 75 %
34. Move to the right of our main layer
35. Send to the bottom
36. Duplicate- Image mirror and move to the bottom left of our main image
37. Merge bottom two layers together
38. Duplicate
39. Blur the top layer using Gaussian Blur 5.00
40. Change this layers opacity to soft light
41. Merge all layers visible
42. Open paper 21 and paste as a new layer
43. Move this layer to the bottom
44. Apply mask of your choosing
45. That's it!!! We are through!!! I would love to see your results…

Punky Pink


This tutorial is for those that have a working knowledge of PSP. This tutorial was written by me on the 13th day of September 2010 and any resemblance is purely coincidental. I used PSP 9, but any version should work. I do not allow my tutorials to be translated and please do not claim them as your own. If you would like to share the tutorial please send a link to my blog.

Supplies Needed:

• Tube of Choice: I am using the work of the very talented Zindy Nielsen You can purchase her work Here Please do not use her work without the proper license!

• Scrapkit: Im using the Plush PTU kit from the wonderful Juicy Bits which can be purchased Here

• Template: I am using Template100 from Missy which can be found here.

Shall we begin?


1. Open your template and delete the watermark layer
2. Highlight the circle layer
3. Selections—select all—float—defloat
4. Paste paper09 as a new layer and resize only the paper layer by 50%
5. Selections- Invert- Delete
6. Delete the "circle layer"
7. Highlight circle 2 layer
8. Selections—select all—float—defloat
9. Paste paper04 as a new layer resize by 50%
10. Selections – invert- delete
11. Delete the original circle 2 layer
12. Repeat this process with layers Circle 3 and circles 4 (using papers of choice) I used the same papers flopping them around!
13. Now repeat the process again for our rectangle layers using papers of choice.
14. Now let's add a drop shadow to our circle layers
15. Drop shadow settings: 0,0,100,5, black
16. Now we are going to add a border to all of our rectangle layers
17. Selections—Select all—Float—Defloat
18. Selections—Modify—Add Selection borders
19. Fill each border with a color of your choice ( I used black and a shade of pink)
20. Add noise to each border
21. Gaussian, 80%, monochrome checked
22. Now we want to add our tube within the borders of the top rectangle
23. Crop the excess parts of the tube off so it fits nicely
24. Add drop shadow to your tube layer
25. Add pin01 to the top of our frame
26. Add your drop shadow once again
27. Add ribbon01 to the bottom of our frame and delete the excess once again
28. Resize flowers to your liking and place them along the top of our ribbon
29. Add any additional elements at this time
30. Delete the background layer
31. Add your copyrights
32. Save as a PNG and we are done

Punked Out


This tutorial is for those that have a working knowledge of PSP. This tutorial was written by me on the 13th day of September 2010 and any resemblance is purely coincidental. I used PSP 9, but any version should work. I do not allow my tutorials to be translated and please do not claim them as your own. If you would like to share the tutorial please send a link to my blog.

Supplies Needed:

  • Template: Template 25 by AquaRebel315 which can be found here
  • 4 Tubes of Choice: I'm using the work of Ismael Rac which you can purchase here ( I purchased mine at AMI, which is now gone)
  • Scrap Kit: I'm using the PTU Skull Funk kit by Missy of Scraps with Attitude which can be purchased here.
Lets Begin:
1. Open our template and delete the credits layer
2. Highlight raster 9
3. Selections—Select all—Float—defloat
4. Paste paper2 as a new layer
5. Selections—invert
6. Now hit delete on your keyboard
7. Delete original raster 9 layer
8. Repeat steps 2-7 for all of our other template layers choosing different papers to your liking
9. Now highlight raster5 this is our grey dots
10. Adjust- Add noise 80% Gaussian monochrome checked
11. Now we have all of our layers with papers
12. We need to add a drop shadow to all layers
13. Drop shadow settings : 0,0,100,2 black
14. Now we want to add our tubes to the 3 top rectangles
15. I used 3 different tubes but You can use one tube and just put different portions of the tube in each rectangle
16. Lower the opacity of each tube between 40-60 (to your liking)
17. Apply penta filter dot and cross
18. Now paste your main tube to your liking as well
19. Add a drop shadow
20. Open Skull lips 4 and resize by 30% twice!
21. Paste as a new layer and post to your liking
22. Using the other skull lips you can put those to your liking as well
23. Open Glitter of choice resize by 70% twice and send to the bottom
24. Move to the left of our tag
25. Repeat with another glitter but move to the bottom right of our tag
26. Now you can add the other glitter if you choose to do so
27. Open doodle 2 and resize to your liking placing below our glitter layers
28. Add any other elements of choice at this time
29. Add your copyright at this time
30. Delete the background layer and merge visible
31. Export as a transparent PNG

Let Your Love Flow


This tutorial is for those that have a basic working knowledge of PSP. This tutorial was written by me on the 19th day of September 2010 and any resemblance is purely coincidental. I used PSP 9, but any version should work. I do not allow my tutorials to be translated and please do not claim them as your own. If you would like to share the tutorial please send a link to my blog.

Supplies Needed:
--Tubes of Choice: I'm using the work of Anna Marine which you can purchase at CILM
--Scrap Kit: Im using the PTU Clearly Yours kit by Juicy Bits which you can purchase here.
--Plugins: Muras Meister Copies and Penta Jeans

Lets Begin:

1. Open a new image 600 x 600 ( you can resize later if you choose)
2. Open Frame02.png
3. Resize by 75%
4. Paste as a new layer on our working image
5. Using Your Selection tool draw a rectangle around our frame
6. Open Paper 2 and paste as a new layer
7. Selections-- Invert hit delete on your keyboard
8. Paste your tube as a new layer within our frame to your liking
9. now hit delete one more time
10. Add a drop shadow to your tube layer, and frame layer
11. I used drop shadow Settings 0,0,75,2 Black
12. Open heart of Choice and resize 10%
13. Effects-- Plugins-- Muras Meister with the following settings
14. Wave (horizontal) with its default setting
15. crop off excess hearts ( ones going past the frame)
16. duplicate
17. Image flip
18. Repeat steps 12-16 with another heart but after placement send to bottom
19. Open Heart06 and resize by 50%
20. Move to the center right of our frame
21. Add drop shadow of your choice
22. Merge Visible
23. Duplicate
24. Adjust Blur Gaussian Blur 25
25. send to the bottom
26. Effects-- Plugins-- Penta-- Jeans
27. Amount 62 Border width 4
28. Merge all visible
29. Add Text of choice at this time and copyrights

Cheers


This tutorial is for those that have a working knowledge of PSP. This tutorial was written by me on the 22nd day of September 2010 and any resemblance is purely coincidental. I used PSP 9, but any version should work. I do not allow my tutorials to be translated and please do not claim them as your own. If you would like to share the tutorial please send a link to my blog.

Supplies Needed:

Tubes of Choice: I'm using the work of Jessica Dougherty which you can purchase here

Scrap Kit: Im using the PTU Cherries and Fairies kit by Mystical Illusionz which can be purchased here.

Shall we Begin?

1. Open a new image 600x600 (we can resize later)
2. Open MIZ_JD_frame1.png
3. Resize by 50%
4. Paste as a new layer on our new working image
5. Using your magic wand with the feather settings at 2
6. Click in the center of the frame
7. Paste paper of your choosing as a new layer
8. Selections—Modify expand by 2
9. Selections—Invert
10. Hit delete on your keyboard
11. Move this layer below our frame
12. Now using the magic wand click the outer frame ring
13. Add a New raster layer
14. At this time fill with a color from your tube
15. Move this layer to the bottom
16. Add noise 20%
17. Open your Tube
18. Copy and paste as a new layer
19. Place to your liking (resize if Necessary)
20. Add a drop shadow to your frame now
21. Also drop shadow your tube if you would like
22. Open twisted Ribbon of choice
23. Paste as a new layer on your working image
24. Now the choice is yours you can leave it over the whole tube or you can
25. Crop your tube out to your liking
26. Open cherries of choice resize by 50%
27. Paste as a new layer ( depending on your tag you may need to resize a little more)
28. Image flip
29. Muras Meister Copies with the settings of encircle
30. Paste some flowers to your liking
31. Merge all visible
32. Add your copyrights and text at this time

That's it we are done! Hope you like your results!