This tag was made using Schnegges portion. and I used the amazing PTU tube by the talented Zindy S.D. Nielsen and can be purchased through her store HERE
Hugs,
1.29.2014
BCA06-2014
BCA05
This tutorial is for those that have a
working knowledge of PSP. This tutorial was written by me on January 27, 2014 and
any resemblance is purely coincidental. I use PSP 9, but any version should
work. I do not allow my tutorials to be translated and please do not claim them
as your own. If you would like to share the tutorial please send a link to my
blog. Thank you!
Things Needed:
Tube/Image of choice:
I am using a tube by the talented Elias Chatzoudis called Rose, which is
a PTU Tube which you can buy in his store HERE. Please do not use his art
without obtaining a license and purchasing this tube.
Kit of choice: I am using Designs by Sarah’s portion of Save
the Boobies collab which you can buy from Pimp My Tag with Scraps HERE
Plugins: None Used
Masks/Templates: None
Used
Font, Animation, or other items needed: Font of Choice
Let’s Begin:
1)
Open a new image 600x600 72dpi (working image)
2)
Open both sb_pmt_Mix N Match_Save the
Boobies_print 1.png and sb_pmt_Mix N Match_Save the Boobies_print 2.png
3)
Resize by 80%
4)
Copy and paste both as new layers on our working
image
5)
Rotate both of these layers by 90 degrees
6)
Now put one of the layers to the far left
7)
Now move the other alongside of the (see screen shot below)
8)
Now repeat this until we have them across our
working image (or until your happy with the look)
9)
Open sb_pmt_Mix N Match_Save the Boobies_frame
2.png
10)
Paste as a new layer on our working image
11)
Select the inside of the frame with your magic
wand
12)
Open paper of your choosing now and again paste
as a new layer on our working image
13)
Selections- Invert
14)
Press your delete key once and move this layer
below your frame layer
15)
Open your tube and if need be resize to your liking and paste as
a new layer on our working image
16)
I cropped my tube to make it appear like the
tube was coming out of the frame
17)
I also duplicated the tube and placed
differently and lowered the opacity for this layer
18)
Open the ribbon of your liking and copy and
paste as a new layer and resize if need be
19)
Crop any excess at this time too
20)
Open sb_pmt_Mix N Match_Save the
Boobies_greenery 2.png
21)
Resize by 80% placing to the top right of our
frame
22)
Duplicate – image – mirror
23)
Now choose an element to place in the center of
the greenery resizing if you need too
24)
Open sb_pmt_Mix N Match_Save the Boobies_flower
3.png
25)
Resize by 80% and paste as a new layer
26)
Rotate to your liking
27)
Duplicate-image-mirror
28)
Continue to duplicate the flowers until you are
happy with you tag
29)
You can now add more elements if you choose to
do so at this time
30)
I added the flowers to the top as my final
element, as I didn’t want to “crowd the
tag” I really like the softness of this tag
31)
Add your copyrights and name
32)
Export on .PNG
Thank you so much for trying my tutorial I
would love to see your results!!!
Hugs,
1.27.2014
BCA04
This tutorial is for those that have a working knowledge of PSP. This tutorial was written by me on January 25, 2014 and any resemblance is purely coincidental. I use PSP 9, but any version should work. I do not allow my tutorials to be translated and please do not claim them as your own. If you would like to share the tutorial please send a link to my blog. Thank you!
Things Needed:
Tube/Image of choice: Im using the wonderful art of Zindy S.D.Nielsen which is a PTU tube so please don’t use any tubes that you haven’t
purchased or do not have a license to use.
Kit of choice: I am using part of a collab from Pimp My Tagswith Scraps called Save the Boobies, a
beautiful BCA collab. This portion is created by Polka Dot Scraps
Plugins: None Needed
Masks/Templates: None Needed
Font, Animation, or other items needed:
Let’s Begin:
1)
Open a new image 600 x 600 72 DPI
2)
Open PDS_StB- string.png
3)
Copy and paste as a new layer on our working
image
4)
Resize by 85%
5)
Open PDS_StB- string.png
6)
Resize by 85 %
7)
Copy and paste as a new layer on our working
image
8)
Adjust- sharpness- sharpen
9)
Crop off any of the excess that you don’t want
to keep on your tag
10)
Now highlight the actual bookmark layer again
11)
Selections- select all- float-defloat
12)
Open your tube at this time and copy and paste
as a new layer on our working image
13)
Selections –invert
14)
Hit delete on your keyboard- select none
15)
Now you can lower the opacity or add a texture
if you would like to your tube layer
16)
I however chose to duplicate my tube layer
17)
On the duplicate layer adjust-blur-gaussian blur
with a radius of 7.00
18)
Now I changed the opacity to hard light
19)
Highlight our bookmark layer again
20)
Selections- select all- float-defloat
21)
Now select the blurred layer of our tube again
22)
Hit delete on the keyboard again
23)
Selections –invert
24)
New raster layer
25)
Selections-Modify- Select Selections Borders
26)
Both sides- anti-alias- border width 2
27)
Now open a paper of your choosing
28)
Copy and paste as a new layer on our working
image
29)
Selections- Invert
30)
Hit delete on your keyboard again one time
31)
Select none
32)
Add a light drop shadow to this layer
33)
Open PDS_StB-
heartstem.png
34)
Resize by 70%
35)
Paste as a new layer on the working image
36)
Rotate slightly using our deform tool
37)
Place to your liking
38)
Send this layer to the bottom and add a drop
shadow
39)
Duplicate
40)
Image- Mirror
41)
Now duplicate again move this layer down a bit
42)
Again place to your liking you might have to rotate
them a little more to get them to a angle that you like
43)
Duplicate again-
44)
Image- Mirror
45)
Open PDS_StB- scatter.png
46)
Resize by 60 % and place to the top left of our
“bookmark”
47)
Add a nice drop shadow
48)
Duplicate
49)
Image mirror
50)
Image flip
51)
Open PDS_StB- heart1.png
52)
Resize by 60%
53)
Move this over to the bottom left of our
bookmark
54)
Open PDS_StB- cupcake.png
55)
Resize by 60% and again paste as a new layer
56)
Move it to the bottom left of our bookmark
57)
Now go back throughout our layers and add drop
shadow to the layers you would like a drop shadow on
58)
You can also add any other elements of your
choosing at this time
59)
Once satisfied merge visible
60)
Add your copyrights at this time and Name and export as a PNG
I hope that you like the way your new
bookmark tag turned out!
Hugs,
1.20.2014
Pink Clouds-
This tutorial is for those that have a
working knowledge of PSP. This tutorial was written by me on January 20, 2014 and
any resemblance is purely coincidental. I use PSP 9, but any version should
work. I do not allow my tutorials to be translated and please do not claim them
as your own. If you would like to share the tutorial please send a link to my
blog. Thank you!
Things Needed:
Tube/Image of choice: I am using the work of Constanza Ehrenhaus
which is an exclusive tube for those who took part in Taking back PSP Part 1.
Kit of choice: I am using Pimp’d Designz portion of the Save
the Boobies Collab Which can be bought at Pimp My Tags w/ Scraps
Plugins: Penta- Jeans
Masks/Templates: Im using an awesome template created by Dee
of DagerouslyDeliciousDesignz called
Template 16 Pinkclouds
Font, Animation, or other items needed: We can use the same font for our names, so it wouldn’t
clash with Dees Word art. Its called Pink Clouds and can be found here or you can find another font that you sits
well with the word art
Let’s Begin:
1)
Open the template of your choosing in PSP and
hit Shift and D to duplicate the
template and close the original
2)
Close off the top layer which is Dees Copyright
layer
3)
Now close off the bottom layer, so that when we
are done we can save the file as a .png file
4)
Now starting from the bottom you will select
each layer and fill with the colors,
patterns, or even paper of your choosing
5)
On Right Blue Circle layer go to Selections-
select all-float-defloat
6)
Layers- New Raster Layer-
7)
Paste into selection- I used pd12-pp-08.png
8)
Delete the original blue circle layer
9)
Repeat Steps 5-8 for all layers
like I said using colors, papers, patterns or textures of your choosing
10)
Once satisfied with your choices add a drop
shadow to all layers I used the following drop shadows :
a)
0, 0, 75, 5.00, Black
11)
Open your tube of choosing and place to your
liking
12)
Now the tube I am using doesn’t have a close up
layer but if yours does you could always put it inside the cloud frame and
lower the opacity to make the tag appear to be full
13)
I am now going to begin applying some of the
elements from the kit to spice the tag up just a bit more as I love how the
template pulled everything together I really love the elements in this kit too
14)
Open pd12-pink-pin.png and paste as a new layer move down to place below the left side of the
word art
15)
Open flower of choice and resize by 50%
16)
Place to your liking
17)
I put mine on the center of the ribbon
18)
I added a button to the center of the flower as
well
19)
Now open the beads
20)
Paste as a new layer
21)
Place to your liking duplicating and placing them in various areas
resizing to your liking
22)
Now merge visible once content with all of your
placements
23)
If you want to resize do so now I resized mine
by 75%
24)
Duplicate this layer
25)
Adjust-Blur-Gaussian blur- 7.00
26)
Change the opacity to Hard light
27)
You can also bring the opacity down a bit if you
don’t like the drastic change
28)
I also used Penta- Jeans Plugin on the blurred
layer to give a little more texture
29)
Open pd12-kiss.png and resize by 70 %
30)
Move to our empty area of our tag (if you use
the same tube)
31)
Lower the opacity of this layer to your liking
(my setting is at 23 in this particular tag
32)
Add any other little elements you might want at
this time as well
33)
Add your copyrights
34)
Add your name and export as a .png file
I hope that you all like your tag and would love to see any
results one might have using this tut.
Hugs,
